Conversion of carbon dioxide in biogas into acetic acid by Clostridium thailandense immobilized on porous support materials.

This study aimed to convert CO2 in biogas into acetic acid using immobilized Clostridium thailandense cells on various support materials, including activated carbon, expanded clay, and coir. Immobilized cells and free cells were evaluated for their CO2 conversion ability into acetic acid using H2 as an electron donor at an H2 to CO2 in biogas ratio of 2:1 (v/v), 30 °C, 150 rpm. Results showed that immobilized cells on activated carbon increased CH4 content to 96.9% (v/v), and acetic acid production to 15.65 mmol/L within 96 h. These values outperformed free cells. The activated carbon-immobilized cells could be reused two times without losing efficacy in the purification of biogas and acetic acid production. This work indicates that using the immobilized cells offers a sustainable approach to biogas upgrading, reducing the environmental footprint of biogas production by increasing its energy content and purity.

Enhancing bio-hydrogen and bio-methane production of concentrated latex wastewater (CLW) by Co-digesting with palm oil mill effluent (POME): Batch and continuous performance test and ADM-1 modeling.

This study aimed at investigating the biohydrogen and biomethane potential of co-digestion from palm oil mill effluent (POME) and concentrated latex wastewater (CLW) in a two-stage anaerobic digestion (AD) process under thermophilic (55 ± 3 °C) and at an ambient temperature (30 ± 3 °C) conditions, respectively. The batch experiments of POME:CLW mixing ratios of 100:0, 70:30, 50:50, 30:70, and 0:100 was investigated with the initial loadings at 10 g-VS/L. The highest hydrogen yield of 115.57 mLH2/g-VS was obtained from the POME: CLW mixing ratio of 100:0 with 29.0 of C/N ratio. While, the highest subsequent methane production yield of 558.01 mLCH4/g-VS was achieved from hydrogen effluent from POME:CLW mixing ratio of 70:30 0 with 21.8 of C/N ratio. This mixing ratio revealed the highest synergisms of about 9.21% and received maximum total energy of 19.70 kJ/g-VS. Additionally, continuous hydrogen and methane production were subsequently performed in a series of continuous stirred tank reactor (CSTR) and up-flow anaerobic sludge blanket reactor (UASB) to treat the co-substate. The results indicated that the highest hydrogen yield of POME:CLW mixing ratio at 70:30 of 95.45 mL-H2/g-VS was generated at 7-day HRT, while methane production was obtained from HRT 15 days with a yield of 204.52 mL-CH4/g-VS. Thus, the study indicated that biogas production yield of CLW could be enhanced by co-digesting with POME. In addition, the two-stage AD model under anaerobic digestion model no. 1 (ADM-1) framework was established, 9.10% and 2.43% of error fitting of hydrogen and methane gas between model simulation data and experimental data were found. Hence, this research work presents a novel approach for optimization and feasibility for co-digestion of POME with CLW to generate mixed gaseous biofuel potentially.

Clostridium thailandense sp. nov., a novel CO2-reducing acetogenic bacterium isolated from peatland soil.

Some species of the genus Clostridium are efficient acetate producers and have been deemed useful for upgrading industrial biogas. An acetogenic, strictly anaerobic, Gram-stain-positive, subterminal endospore-forming bacterium designated strain PL3T was isolated from peatland soil enrichments with H2 and CO2. Cells of strain PL3T were 0.8-1.0×4.0-10.0 µm in size and rod-shaped. Growth of strain PL3T occurred at pH 6.0-7.5 (optimum, pH 7.0), at 20-40 °C (optimum, 30 °C) and with 0-1.5 % (w/v) NaCl (optimum, 0.5%). Biochemical analyses revealed that strain PL3T metabolized lactose, maltose, raffinose, rhamnose, lactic acid, sorbitol, arabinose and glycerol. Acetic acid was the predominant metabolite under anaerobic respiration with H2/CO2. The major cellular fatty acids were C16 : 0, C16 : 1 cis 9 and C17 : 0 cyc. The main polar lipids were diphosphatidylglycerol, phosphatidylethanolamine, aminolipid and aminophospholipid. Phylogenetic analysis based on 16S rRNA gene sequences showed that strain PL3T belongs to the genus Clostridium with the highest sequence similarity to Clostridium aciditolerans DSM 17425T (98.6 %) followed by Clostridium nitrophenolicum (97.8 %). The genomic DNA G+C content of strain PL3T was 31.1 mol%.The genomic in silico DNA-DNA hybridization value between strain PL3T and C. aciditolerans DSM 17425T was 25.1 %, with an average nucleotide identity of 80.2 %. Based on phenotypic, chemotaxonomic and phylogenetic differences, strain PL3T was suggested to represent a novel species of the genus Clostridium, for which the name Clostridium thailandense sp. nov. is proposed. The type strain is PL3T (=DSM 111812T=TISTR 2984T).

Improvement of empty palm fruit bunches biodegradability and biogas production by integrating the straw mushroom cultivation as a pretreatment in the solid-state anaerobic digestion.

Empty fruit bunches (EFB) have low biodegradability and restrict their commercial utilization in biogas plants. Integration of straw mushroom (Volvariella volvacea) cultivation as a function of bio-pretreatment on EFB to improve biodegradability and methane production by solid-state anaerobic digestion (SS-AD) was investigated. The mushroom yield was 47.3 kg·tonne-1 EFB with remaining weight in spent mushroom-EFB (S-mEFB) of 82%. The cellulose, hemicellulose, and lignin of EFB were degraded by 3.3%, 21.3%, and 17.6%, respectively, with an increased surface area of S-mEFB. The biodegradability of S-mEFB (62.7%) was 2 times higher than raw EFB (33.5%) with the highest methane yield and production of 281 mL CH4·g-1 VS and 50.6 m3·tonne-1 S-mEFB, respectively. The co-digestion of S-mEFB with 5% v/w POME had highest methane yield of 405 mL CH4·g-1 VS with biodegradability of 90.8%. Integrating straw mushroom cultivation with SS-AD is a promising strategy for achieving an environmentally friendly and economically feasible process.

Valorization of microalgal biomass for biohydrogen generation: A review.

Third generation biomass, i.e. microalgae, has emerged as a promising alternative to first and second generation biomass for biohydrogen production. However, its utilization is still low at present, due to several reasons including the strong and rigidity of the microalgal cell wall that limit the hydrolysis efficiency during dark fermentation (DF) and photofermentation (PF) processes. To improve the utilization efficiency of microalgal biomass, it is crucial that important aspects related to the production of the biomass and the following processes are elaborated. Thus, this article provides detailed overview of algal strains, cultivation, and harvesting. It also presents recent research and detailed information on microalgal biomass pretreatment, and biohydrogen production through DF, PF, and co-digestion of microalgal biomass with organic materials. Furthermore, factors affecting fermentation processes performance and the use of molecular techniques in biohydrogen production are presented. This review also discusses challenges and future prospects towards biohydrogen production from microalgal biomass.

Comparative assessment of single-stage and two-stage anaerobic digestion for biogas production from high moisture municipal solid waste.

BACKGROUND: Anaerobic digestion (AD) is a suitable process for treating high moisture MSW with biogas and biofertilizer production. However, the low stability of AD performance and low methane production results from high moisture MSW due to the fast acidify of carbohydrate fermentation. The effects of organic loading and incineration fly ash addition as a pH adjustment on methane production from high moisture MSW in the single-stage AD and two-stage AD processes were investigated. RESULTS: Suitable initial organic loading of the single-stage AD process was 17 gVS L-1 at incineration fly ash (IFA) addition of 0.5% with methane yield of 287 mL CH4 g-1 VS. Suitable initial organic loading of the two-stage AD process was 43 gVS L-1 at IFA addition of 1% with hydrogen and methane yield of 47.4 ml H2 g-1 VS and 363 mL CH4 g-1 VS, respectively. The highest hydrogen and methane production of 8.7 m3 H2 ton-1 of high moisture MSW and 66.6 m3 CH4 ton-1 of high moisture MSW was achieved at organic loading of 43 gVS L-1 at IFA addition of 1% by two-stage AD process. Biogas production by the two-stage AD process enabled 18.5% higher energy recovery than single-stage AD. The 1% addition of IFA into high moisture MSW was useful for controlling pH of the two-stage AD process with enhanced biogas production between 87-92% when compared to without IFA addition. Electricity production and energy recovery from MSW using the coupled incineration with biogas production by two-stage AD process were 9,874 MJ ton-1 MSW and 89%, respectively. CONCLUSIONS: The two-stage AD process with IFA addition for pH adjustment could improve biogas production from high moisture MSW, as well as reduce lag phase and enhance biodegradability efficiency. The coupled incineration process with biogas production using the two-stage AD process was suitable for the management of MSW with low area requirement, low greenhouse gas emissions, and high energy recovery.

Insights into the Bacterial Diversity of the Acidic Akhtala Mine Tailing in Armenia Using Molecular Approaches.

The impact of the heavy metal contamination and acidity on the bacterial community was studied in samples collected from the Akhtala copper mine tailing using molecular approaches. The bacterial community structure analysis by PCR-DGGE fingerprinting revealed an abundance of Firmicutes, Acidobacteria, and Proteobacteria in different layers of the Akhtala tailing. 454 pyrotag sequence analyses revealed that a significant part of the sequences originated from Proteobacteria (49%) and Bacteroidetes (43%). Bacterial taxa are distributed also in phyla Saccharibacteria (2%), Verrucomicrobia (1.5%), Gammatimonadetes (1%), and some minor additional bacterial groups. The main primary producers in the Akhtala tailing appear to be obligate autotrophic Thiobacillus and Sulfuritalea species. Representatives of Lutibacter and Lysobacter genera are the most abundant acid-tolerant heterotrophs in the studied tailing. The presence of a large number of yet-uncultivated species emphasizes the importance of the future exploration of the tailing as an important source of novel bacteria.

Effects of volatile fatty acids in biohydrogen effluent on biohythane production from palm oil mill effluent under thermophilic condition

Background: Biohydrogen effluent contains a high concentration of volatile fatty acid (VFA) mainly as butyric, acetic, lactic and propionic acids. The presence of various VFAs (mixture VFAs) and their cooperative effects on two-stage biohythane production need to be further studied. The effect of VFA concentrations in biohydrogen effluent of palm oil mill effluent (POME) on methane yield in methane stage of biohythane production was investigated. Results: The methane yield obtained in low VFA loading (0.9 and 1.8 g/L) was 15­20% times greater than that of high VFA loading (3.6 and 4.7 g/L). Butyric acid at high concentrations (8 g/L) has the individual significantly negative effect the methane production process (P b 0.05). Lactic, acetic and butyric acid mixed with propionic acid at a concentration higher than 0.5 g/L has an interaction significantly negative effect on the methanogenesis process (P b 0.05). Inhibition condition had a negative effect on both bacteria and archaea with inhibited on Geobacillus sp., Thermoanaerobacterium thermosaccharolyticum, Methanoculleus thermophilus and Methanothermobacter delfuvii resulting in low methane yield. Conclusion: Preventing the high concentration of butyric acid, and propionic acid in the hydrogenic effluent could enhance methane production in two-stage anaerobic digestion for biohythane production.

Draft genome sequence of Thermoanaerobacterium sp. strain PSU-2 isolated from thermophilic hydrogen producing reactor.

Thermoanaerobacterium sp. strain PSU-2 was isolated from thermophilic hydrogen producing reactor and subjected to draft genome sequencing on 454 pyrosequencing and annotated on RAST. The draft genome sequence of strain PSU-2 contains 2,552,497 bases with an estimated G + C content of 35.2%, 2555 CDS, 8 rRNAs and 57 tRNAs. The strain had a number of genes responsible for carbohydrates metabolic, amino acids and derivatives, and protein metabolism of 17.7%, 14.39% and 9.81%, respectively. Strain PSU-2 also had gene responsible for hydrogen biosynthesis as well as the genes related to Ni-Fe hydrogenase. Comparative genomic analysis indicates strain PSU-2 shares about 94% genome sequence similarity with Thermoanaerobacterium xylanolyticum LX-11. The nucleotide sequence of this draft genome was deposited into DDBJ/ENA/GenBank under the accession MSQD00000000.

Effect of temperature and initial pH on biohydrogen production from palm oil mill effluent: long-term evaluation and microbial community analysis

Anaerobic sludge from palm oil mill effluent (POME) treatment plant was used as a source of inocula for the conversion of POME into hydrogen. Optimization of temperature and initial pH for biohydrogen production from POME was investigated by response surface methodology. Temperature of 60ºC and initial pHof 5.5 was optimized for anaerobic microflora which gave a maximum hydrogen production of 4820 ml H2/l-POME corresponding to hydrogen yield of 243 ml H2/g-sugar. Total sugar consumption and chemical oxygen demand (COD) removal efficiency were 98.7 percent and 46 percent respectively. Long-term hydrogen production in continuous reactor at HRT of 2 days, 1 day and 12 hrs were 4850 +/- 90, 4660 +/- 99 and 2590 +/- 120 ml H2/l-POME, respectively. Phylogenetic analysis of the mixed culture revealed that members involved hydrogen producers in both batch and continuous reactors were phylogenetically related to the Thermoanaerobacterium thermosaccharolyticum. Batch reactor showed more diversity of microorganisms than continuous reactor. Microbial community structure of batch reactor was comprised of T. thermosaccharolyticum, T. bryantii, Thermoanaerobacterium sp., Clostridium thermopalmarium and Clostridium NS5-4, while continuous reactor was comprised of T. thermosaccharolyticum, T. bryantii and Thermoanaerobacterium sp. POME is good substrate for biohydrogen production under thermophilic condition with Thermoanaerobacterium species play an important role in hydrogen fermentation.